Solar Cell Phone Charger Nokia Motorola Samsung
·Highly versatile with as many as 5 different connectors/tips, compatible with most cell phones, PSPs, MP3/MP4s, PDAs, digital cameras, electronic dictionaries, IPAQs
·Specification: Input: AC100V-240V Output: 5.5V (3.7V 4.2V 5V 9V) 400-800mA Li-polymer Battery: 2600 mAh
·Package Included: Solar Panel x 1 AC Adapter x 1 Mini USB Output Cable x 1 Mini USB to Female USB Cable x 1 Mini USB to USB Cable x 1 Connectors x 4
·Usage: 1. Pre-charging the solar charger: a, Place the solar panel under direct sunlight, the charger will transfer sunlight into electric power and store it in the Lithium battery. It takes 10-15 hours for the battery to be fully charged depending on the intensity of sunlight; b, pre-charge the solar charger with AC adapter. It takes 3-5 hours for the battery to be fully charged this way; c, you can also pre-charge the solar charger from USB ports. 2. Charging cell phones and other digital devices with the solar charger: a, Put the in/out switch in neutral. Select from the five connectors the right connector/tip that goes with your cell phone or other digital devices. Fit the connector onto the correct end of Mini-USB output cable (the one with the hole), and then insert the Mini-USB tip into the “in/out” jack of the solar charger. Then slide the voltage switch to choose output voltage (3.7V 4.2V 5V 9V). Finally, check all the connections and slide the in/out switch to “out”. b, or, for devices charged from USB ports, pick out the Mini-USB to female USB cable for connection. c, or, for devices with USB jacks, pick out the Mini-USB to USB cable for connection.
·Slide the voltage switch on the top side to change output voltage
·Notice: 1. For the first two times users are advised to charge the solar charger with AC110V-240V power for 15 hours straight to fully activate the battery 2. For safety’s sake, please do NOT use OTHER AC adapters